Race Ramps Hook Nose Rack Ramps for Lifts and Service Platforms

Overview

The Race Ramps Hook Nose Rack Ramps for Lifts and Service Platforms is a ramp from Race Ramps. It is rated at 1,500 lb.

From Race Ramps

A Hooked Nose That Stays Where You Put It The failure mode with any ramp in front of a lift is the same. The tire loads the incline, the ramp creeps forward, and the gap opens between the ramp and the runway at exactly the moment you do not want it to. These end in a 3 inch hook connector instead of a flat face. The hook engages rather than butting up, so the ramp holds its position against the runway through the climb. Three sizes. 4 inch lift over 34 inches at 8 degrees , 5 inch lift over 48 inches at 6.4 degrees , and an extra wide 5 inch on a 20 inch deck that takes tires up to 18 inches . The 6.4 degree versions are the shallowest rack ramps Race Ramps makes. Each size is sold as a pair , rated 1,500 lbs per ramp. If your runway suits a seated or bridged nose instead, see the cutout and lip nose rack ramps . Benefits of the Hook Nose Rack Ramps The hook does the locating Three inches of hook engaging the runway rather than a flat face resting against it. The ramp holds station as the tire loads it, which is the whole reason this nose style exists. 6.4 degrees on the long ones Four feet of run for five inches of rise. That is the shallowest approach in the rack ramp range and the one to reach for when the car in the bay is the reason you bought ramps at all. An extra wide option for fat rubber A 20 inch deck rated for tires up to 18 inches, against 12 inches on everything else here. If the shop sees wide drag setups or heavy trucks, that is the version that carries them properly. Seven to fifteen pounds Even the extra wide version is a one person carry. A steel ramp fou…

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-RACK-HN14-4
• Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
• Material: 100% solid high density foam with anti slip traction coating
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr