Race Ramps Rack Ramps for Lifts and Service Platforms

Overview

The Race Ramps Rack Ramps for Lifts and Service Platforms is a ramp from Race Ramps. It is rated at 1,500 lb.

From Race Ramps

The Ramp That Gets a Low Car Onto the Rack A drive on lift or a service platform has a runway that starts a few inches off the floor. On most cars that is nothing. On a low car it is the point where the splitter stops and the tire has not even reached the ramp. Rack ramps are the bridge. They lay a shallow foam incline in front of the runway so the car climbs gradually instead of hitting a step, and the shop keeps a ramp that one person carries rather than a steel pair nobody wants to drag out. Two nose styles. The 4 Inch Cutout Nose is 27.5 inches long at 8.8 degrees , with a 3 inch by 1 inch cutout at the top that seats over the edge of the runway. The 5 Inch Lip Nose runs 40 inches at 8.6 degrees and ends in a 3 inch lip that bridges onto the deck. Each style is sold as a pair . 1,500 lbs per ramp, tires up to 12 inches . Need a hooked connector instead? See the hook nose rack ramps . Benefits of Rack Ramps Built to meet a runway A general purpose ramp ends in a flat top and leaves a step. These end in a connector shaped to sit against the lift, so the tire crosses onto the runway without dropping into a gap or climbing a lip. Under nine degrees either way 8.8 degrees on the cutout and 8.6 on the lip nose. Both are gentle enough for the cars that actually need help getting onto a rack, which is the entire reason a shop buys these. Four pounds, or nine A tech grabs a pair one handed and has them positioned before a steel set would be out of the corner. In a busy shop that is the difference between the ramps getting used and getting ignored. No rust, no heat transfer Race …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-RACK-4
• Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
• Material: 100% solid high density foam with anti slip traction coating
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr