Race Ramps 11 Inch Two Piece GT Trailer Ramps | RR-TR-11-2
Race Ramps · Trailer Ramp · 1,500 lb | SKU# RR-TR-11-2 Sale
IDRR-TR-11-2 1 / 4 Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP70375 |
|---|---|
| Manufacturer part # | RR-TR-11-2 |
| Brand | Race Ramps |
| Category | Car Ramps & Wheel Cribs |
| Product type | Trailer Ramp |
| Capacity | 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four |
| Lifting height | 11" |
| Shipping weight | 17 lb |
| Finish | Black |
| Origin | Made in the USA |
| Availability | Available to order |
| Delivery | Standard shipping |
| Warranty | 1-year manufacturer warranty | 30-day satisfaction guarantee |
Manufacturer specifications
12 fields as published by Race Ramps.
| Width | 14" |
|---|---|
| Colour | Black |
| Weight | 17 lbs per ramp, both sections together |
| Sold As | Pair, two ramps, four sections in total |
| Capacity | 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four |
| Material | Expanded foam with traction coating |
| Lift Height | 11" |
| Approach Angle | 4.3 degrees at the lower section, 5.4 degrees at the upper |
| Section Length | 68" each, two sections per ramp with a center overlap |
| Maximum Tire Width | 12" |
| Trailer Door Notch | 5" long x 3" high |
| Total Length Assembled | 131" |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Race Ramps 11 Inch Two Piece GT Trailer Ramps | RR-TR-11-2 is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 11".
From Race Ramps
Eleven Inches of Lift, Eleven Feet of Ramp Some cars simply cannot be loaded on a normal ramp. A Carrera GT, a Ford GT, a modern supercar with a front lip and a hundred inch wheelbase needs the climb spread out so far that a single piece ramp would be unmanageable. The RR-TR-11-2 solves it by splitting each ramp in two. Two 68 inch sections overlap at the middle to give 131 inches of total run reaching 11 inches of height, and the whole thing breaks down into pieces one person can carry. The climb starts at 4.3 degrees on the lower section and steps to 5.4 degrees on the upper one, so the shallowest part of the ramp is exactly where the nose of the car is doing the most work. Sold as a pair , four pieces in total. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches . Compare the full range of trailer ramps . Benefits of the RR-TR-11-2 Eleven inches, gently The tallest lift Race Ramps offers for a trailer, and it still starts at 4.3 degrees. No other ramp in the range gets close to that height without a climb a low car cannot survive. Two pieces beat one long one Eleven feet of ramp in a single piece would be awkward to carry, impossible to store in most trailers, and would flex in the middle. Two 68 inch sections solve all three at once. The angle rises as the car does The lower section runs at 4.3 degrees where the front splitter is closest to the ground, then the upper section takes over at 5.4 once the nose is already up and clear. Seventeen pounds per ramp Split across two sections, so nothing you pick up is heavy. Setting up eleven feet of ramp on each si…
About ramps
Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.
What to check before you order
- Approach angle against the front overhang and ride height of your lowest car
- Per-ramp capacity against the axle weight, not the whole vehicle weight
- Ramp length and the height it actually gains you
Key specifications
- Brand: Race Ramps
- Model / part number: RR-TR-11-2
- Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
- Lifting height: 11"
- Material: Expanded foam with traction coating
- Finish: Black
- Shipping weight: 17 lb
- Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
- Origin: Made in the USA
Ideal for
Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.
Ordering & delivery
Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr
You may also like
View all ›
Race Ramps 12 Inch Multi Purpose Wheel Cribs, Set of 2
Race Ramps · 1,500 lb
$233
Race Ramps Rack Ramps for Lifts and Service Platforms
Race Ramps · 1,500 lb
$225
Race Ramps 40 Inch Sport Ramps, 7 Inch Lift | RR-40
Race Ramps · 1,500 lb
$199
Race Ramps Trailer-Mates Tie Down Ramps, 3 Inch Lift
Race Ramps · 1,500 lb
$239
Our price
$983
Race Ramps 11 Inch Two Piece GT Trailer Ramps | RR-TR-11-2
SKU# RR-TR-11-2 · est. $20/mo*