Race Ramps 40 Inch Sport Ramps, 7 Inch Lift | RR-40

Overview

The Race Ramps 40 Inch Sport Ramps, 7 Inch Lift | RR-40 is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 7".

From Race Ramps

Seven Inches of Lift Without Scraping the Nose: the Race Ramps RR-40 The problem with getting a lowered car in the air is not the lift, it is the first six inches. A steel ramp presents a short steep face, and the front of the car reaches it before the tire does. You end up building a run-up out of plywood, which is exactly as safe as it sounds. The RR-40 solves it with length. Forty inches of ramp spreads the climb to a 16.7 degree approach , which Race Ramps designs for short nose vehicles , and it still finishes at 7" of lift . That is two inches more room underneath than their 30" ramp, on a gentler climb. Construction is 100% solid high density foam with an anti slip coating. A pair weighs 12 lbs and carries 6,000 lbs . There is no steel to rust into an epoxy floor and nothing to skate forward as the tire loads it, which is the usual reason a steel ramp ends up wedged against a wall. Sold as a pair , for tires up to 8" wide . Popular for display at shows as well as service. Compare the shorter 30" Rally Ramps , or browse all car ramps . If your car is genuinely slammed, this is not the one. At 16.7 degrees the RR-40 suits a short nose car at or near stock ride height. For a car on coilovers or running a front splitter, the XT climbs at 10.8 degrees and the 72" two stage opens at 6.8 . See all low profile car ramps . Benefits of the RR-40 Length is what buys the clearance Forty inches of run is what turns 7 inches of lift into a 16.7 degree climb. A shorter ramp reaching the same height has to be steeper, and steeper is what catches an air dam. This is the whole design …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-40
• Capacity: 1,500 lbs per ramp | 6,000 lbs per pair
• Lifting height: 7"
• Material: 100% solid high density foam with anti slip traction coating
• Finish: Black
• Overall dimensions: 40" L x 10" W x 10.75" H
• Shipping weight: 6 lb
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr