Race Ramps Portable Pit Stop Ramps, 14 Inch Lift

Race Ramps · Car Ramp · 1,500 lb | SKU# RR-PPS Sale

Race Ramps Portable Pit Stop Ramps, 14 Inch Lift IDRR-PPS 1 / 5

Buy with confidence

Car lifts & shop equipment · Freight to all 50 states

Specified in full

Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.

What is included

Core returns & warranty

Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.

How it works

Freight nationwide

Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.

Shipping rates

Financing available

Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.

Apply now
Included with every truck: Pre-shipment inspectionTitle & customs paperworkDelivery quoteImport compliance
Questions? (470) 201-3931

Details

Capacity 1,500 lbs per ramp | 6,000 lbs total
Lifting height 14"
Material Expanded foam with traction coating
Type Car Ramp
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee
Part # RR-PPS

General

Catalogue ID PSP37039
Manufacturer part # RR-PPS
Brand Race Ramps
Category Car Ramps & Wheel Cribs
Product type Car Ramp
Capacity 1,500 lbs per ramp | 6,000 lbs total
Lifting height 14"
Overall dimensions 220" L x 16" W x 14" H
Shipping weight 250 lb
Finish Black
Origin Made in the USA
Availability Available to order
Delivery Standard shipping
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Manufacturer specifications

11 fields as published by Race Ramps.

Colour Black
Models RR-PPS (standard) | RR-PPS-R (racer, 15" scale cutouts)
Weight 250 lbs per set
Sold As Pair. Multi piece, no piece over 40 lbs
Capacity 1,500 lbs per ramp | 6,000 lbs total
Material Expanded foam with traction coating
Dimensions 220" L x 16" W x 14" H
Lift Height 14"
Approach Angle 10.4 degrees
Wheelbase Range 90" to 115"
Maximum Tire Width 14"

Finance this truck

Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.

Estimated from $70/mo
Call (470) 201-3931

About this product

Overview

The Race Ramps Portable Pit Stop Ramps, 14 Inch Lift is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 14".

From Race Ramps

Fourteen Inches of Lift That Packs Into a Trailer: Portable Pit Stop Ramps A wrap shop needs the whole car in the air and every panel reachable. A race team needs the same thing in a paddock with no lift and no power. Both problems normally end at a permanent installation neither of them can travel with. Portable Pit Stop Ramps are the answer to both. They raise a car 14" off the ground on a 10.4 degree approach , over a 220" run , and the whole thing is a multi piece design where no single piece weighs more than 40 lbs . It assembles by hand and packs down to travel. Each ramp carries 1,500 lbs for 6,000 lbs of vehicle, takes tires up to 14" wide , and suits wheelbases from 90" to 115" . The full set weighs 250 lbs , which sounds like a lot until you compare it to any lift that reaches the same height. Sold as a pair , in standard or racer form. If you want a permanent installation instead, see our scissor lifts . Talk to a specialist about which makes sense for your shop. Benefits of Portable Pit Stop Ramps Lift height without a lift Fourteen inches is more than any other ramp Race Ramps makes and enough to work the full underside of a car. No installation, no anchors, no electrical supply, and nothing that needs a permit or a slab inspection. It actually travels The multi piece construction means no single component is over 40 lbs. Two people can load a full set into a trailer and reassemble it in a paddock, which is the whole reason the product exists. Built for wrap work Race Ramps names wrapping as a primary use. Raising the car on its tires leaves every panel and the…

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

  • Approach angle against the front overhang and ride height of your lowest car
  • Per-ramp capacity against the axle weight, not the whole vehicle weight
  • Ramp length and the height it actually gains you

Key specifications

  • Brand: Race Ramps
  • Model / part number: RR-PPS
  • Capacity: 1,500 lbs per ramp | 6,000 lbs total
  • Lifting height: 14"
  • Material: Expanded foam with traction coating
  • Finish: Black
  • Overall dimensions: 220" L x 16" W x 14" H
  • Shipping weight: 250 lb
  • Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
  • Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr

You may also like

View all ›
Call