Race Ramps 7 Inch Trailer Ramps, 5.5 Degree Approach

Overview

The Race Ramps 7 Inch Trailer Ramps, 5.5 Degree Approach is a ramp from Race Ramps. It is rated at 1,500 lb.

From Race Ramps

Seven Inches of Lift, Three Ways to End the Ramp Seven inches is where most enclosed trailer decks sit once the gate is down. The RR-TR-7 covers that height across 74 inches of ramp, which keeps the approach at 5.5 degrees and gets a low car up without touching down. What changes between the three versions is how the ramp meets the trailer. The Standard has a deep 2.5 inch notch for a conventional door. The Tilt Trailer version drops that to 1 inch so it sits flat against a tilting deck. The Flap Cut Out version adds a 16 inch wide relief in the underside so it clears a hinged dovetail flap, which brings its finished height to 6.25 inches . Everything else stays the same. Same length, same angle, same 1,500 lb rating per ramp, same 15 pounds you can carry one handed. Each configuration is sold as a pair , for tires up to 12 inches . Choose your version above, or compare the full range of trailer ramps . Benefits of the RR-TR-7 Seven inches at 5.5 degrees A six foot run for a seven inch rise. That is a shallower climb than most steel ramps manage for half the height, and it is what lets a splitter car load without a spotter and a piece of plywood. A version for a tilt deck On a tilt trailer the deck itself comes down to meet the ground, so a deep notch leaves the ramp rocking. The Tilt Trailer version uses a shallow 1 inch notch that sits flat on the tilted deck edge. A version for a hinged flap Many ramp gates have a folding dovetail flap at the tip. The Flap Cut Out version has a 16 inch relief in the underside so the ramp straddles that flap rather than teetering on it. F…

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-TR-7
• Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
• Material: Expanded foam with traction coating
• Finish: Black
• Shipping weight: 15 lb
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr