Race Ramps Trailer Side Kick Ramp, 13 Degree Approach | RR-TR-SK-1

Overview

The Race Ramps Trailer Side Kick Ramp, 13 Degree Approach | RR-TR-SK-1 is a ramp from Race Ramps. It is rated at 1,500 lb.

From Race Ramps

Change a Trailer Tire Without a Jack A flat on a tandem axle trailer on the side of a road is the worst place to be looking for a jacking point, on soft ground, with traffic going past. The Trailer Side Kick solves it in the simplest way there is. Drive the good tire on the same side up onto the ramp and the flat tire beside it lifts clear of the ground. No jack, no jacking point, no crawling underneath. It also does the job its name suggests, easing a vehicle up and over the lip at the back of a trailer so a low front end does not catch on the way in. Sold individually . It is 31" long by 12" wide by 7.5" tall with a 13 degree approach, carries 1,500 lbs , weighs 8 lbs , and takes tires up to 10" wide . See all trailer ramps . Benefits of the Trailer Side Kick Lifts a tandem tire with no jack Drive the neighboring wheel up and the flat comes off the ground. On soft shoulder or gravel, where a bottle jack sinks and a scissor jack is a bad idea, this is the safe method. No jacking point to find Trailer frames vary wildly and the wrong lift point bends something expensive. The load stays on the tire and the axle, which is where the trailer already carries it. 8 lbs, so it actually rides along A recovery tool only helps if it is with you. This lives in the trailer or the truck bed permanently because it costs nothing in weight or space to carry. Doubles as a loading aid The other half of its job. Placed at the back of a trailer it softens the step where the ramp meets the deck, which is exactly where a low front end tends to catch. One solid piece Nothing to assemble, unfold, …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-TR-SK-1
• Capacity: 1,500 lbs per ramp
• Material: Expanded foam with traction coating
• Finish: Black
• Overall dimensions: 31" L x 12" W x 7.5" H
• Shipping weight: 8 lb
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr