Race Ramps Scale Ramps for Racing Scales, 2.5 Inch Lift

Overview

The Race Ramps Scale Ramps for Racing Scales, 2.5 Inch Lift is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 2.5".

From Race Ramps

Get a Low Car Onto Corner Scales Without a Fight A set of racing scales is about two and a half inches thick. On a race car with an inch of ground clearance that is a wall, and the usual answer is jacking all four corners and lowering onto the pads, which takes longer than the weighing does. Scale Ramps give the car 2.5" of lift so it drives onto the pads instead. Race Ramps make them in two forms and the choice is entirely about how low the car sits. The Set of 4 is four 14" long ramps at 8.7 degrees , one per wheel, at 1 lb each . The Set of 2 is two 30" long ramps at 7.8 degrees with a 12.5" platform , at 3 lbs each . Both are 12" wide , rated 1,500 lbs per ramp, for tires up to 10" . Working on setup as well as weight? See the Slip Plate Stands and Wheel Stands . Benefits of the Scale Ramps Drive on instead of jacking on Four corners jacked and lowered is fifteen minutes and a chance to disturb the setup you are trying to measure. Driving on takes seconds and leaves the suspension where it was. Two answers for two ride heights The short set at 8.7 degrees suits most cars and packs to nothing. The long set at 7.8 degrees over 30 inches is for the car that will not clear anything, and it has a 12.5 inch platform to settle on. One pound each The set of four weighs four pounds total. It goes in the trailer with the scales themselves and you will never decide to leave it at home to save space. Nothing that dents a scale pad Corner scales are precision instruments and expensive ones. Foam against the pad edge cannot chip or gouge it the way a steel or wooden ramp will over a …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-SCALE
• Capacity: 1,500 lbs per ramp | 6,000 lbs across four
• Lifting height: 2.5"
• Material: Expanded foam with traction coating
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

This item is in stock. Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr