Race Ramps Folding XTenders for 20 Inch Restyler Ramps | RR-EX-20

Overview

The Race Ramps Folding XTenders for 20 Inch Restyler Ramps | RR-EX-20 is a ramp from Race Ramps.

From Race Ramps

10.4 Degrees Down to 6.8, on the Wide Deck System These are add on inclines, not ramps. They fit the 20 inch wide Restyler Ramps only. The ramps themselves are not included. Running the 16 inch system? That takes RR-EX-PPS instead. Restyler Ramps lift a vehicle 14 inches on a 10.4 degree approach. That is gentle for a system this tall, and it is still too steep for a car with a splitter or an aggressive front lip. An XTender adds another 74 inches of run in front of the ramp and brings the combined approach down to 6.8 degrees . The nose lifts well before the ramp gets near it. Each one is 74" long by 20" wide , standing 4" high where it meets the ramp, and it folds into a 30.5" flap and a 43.5" ramp section for storage and transport. Sold in pairs . This is the folding retail version. The Restyler Complete Kit ships the no fold RR-EX-20-NF instead, so take the Kit if you do not need the fold. Benefits of the RR-EX-20 XTenders Six point eight degrees Gentler than any standalone ramp Race Ramps build. On a 14 inch lift that is the difference between a splitter car getting up under its own power and a bad noise at the bottom of the ramp. It folds, so it travels Six feet of ramp that breaks at the joint into a 30.5 inch flap and a 43.5 inch section. This is the version to own if the set moves between bays or goes on a trailer, and it is the only difference from what ships inside the Kit. Cut to the 20 inch deck Width matched to the ramps, so a wide truck tire tracks straight from the XTender onto the deck with no edge or step at the joint. That is exactly why the 16 inch part …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-EX-20
• Material: Expanded foam with traction coating
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr