Race Ramps Slip Plate Stands for Wheel Alignment, 14 Inch Lift | RR-SPS

Overview

The Race Ramps Slip Plate Stands for Wheel Alignment, 14 Inch Lift | RR-SPS is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 14" to the recessed top.

From Race Ramps

Alignment Height Without an Alignment Rack Setting corner weights or checking camber on the garage floor means working on your knees with the car at ride height, and no room for a slip plate under the tire so the suspension can settle where it actually wants to sit. The Slip Plate Stands fix both problems at once. Each stand lifts the car 14" and the top is recessed 2" across a 17.75" square, sized to drop a slip plate, turntable, or grease plate into so the tire can move freely as the suspension loads. Each stand carries 1,500 lbs and weighs 16 lbs . Body is 23.75" long by 18" wide by 16" tall , solid foam with a traction coating that grips a finished floor. Sold in pairs . Slip plates and turntables are not included. Browse our alignment equipment or the full Race Ramps range . Benefits of the Slip Plate Stands A pocket built for the plate The 2 inch recess across a 17.75 inch square holds a slip plate or turntable flush instead of perched on top of a block. Nothing shifts under the tire while you are reading numbers off it. Fourteen inches of working height Enough to get a wrench on a tie rod or a camber bolt without lying flat on the concrete. On a home floor that is the difference between doing the job and paying someone else to. The suspension settles honestly With the tire free to slide on a plate, the car takes its own natural stance under load. Numbers taken with the tires bound against the floor are not the numbers the car drives on. 1,500 lbs per stand Two stands carry 3,000 lbs, four carry 6,000. Buy a second pair to lift all four corners level, which is what co…

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-SPS
• Capacity: 1,500 lbs per stand | 3,000 lbs per pair
• Lifting height: 14" to the recessed top
• Material: Expanded foam with traction coating
• Finish: Black
• Overall dimensions: 23.75" L x 18" W x 16" H per stand
• Shipping weight: 16 lb
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr