Race Ramps 9 Inch Trailer Ramps with Flap Cut Out | RR-TR-9-FLP

Overview

The Race Ramps 9 Inch Trailer Ramps with Flap Cut Out | RR-TR-9-FLP is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 8" at the deck end.

From Race Ramps

Eight Feet of Ramp That Straddles the Flap The RR-TR-9-FLP is the longest single piece ramp Race Ramps builds for trailers. At 95 inches it holds the approach to 5.5 degrees while still reaching a tall deck, which is a combination nothing shorter can manage. Its other job is the flap. A lot of ramp gates have a hinged dovetail section that folds out at the tip, and a flat bottomed ramp just teeters on it. This one has an 18 inch wide relief cut into the underside so it sits down over that flap and lands flat on the gate behind it. If your car is long, low, and going into a trailer with a folding flap, this is the ramp built for exactly that. Everything else in the range asks you to compromise on one of the three. Sold as a pair . 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches . Compare the full range of trailer ramps . Benefits of the RR-TR-9-FLP Ninety five inches of run Nearly eight feet, the longest single piece ramp in the trailer range. Length is the only thing that buys a shallow angle at a tall deck height, and this has more of it than anything else here. Eighteen inch flap relief The underside is cut away so the ramp straddles a folded out dovetail flap and beds down on the gate behind it. No rocking on the hinge, no gap under the middle of the ramp. 5.5 degrees at full height Splitters, side skirts and long overhangs all fail at the transition rather than on the ramp itself. Stretching the climb out this far keeps the break gentle enough that most of them clear. One person still sets them up Foam rather than steel, so eight feet of ramp is someth…

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-TR-9-FLP
• Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
• Lifting height: 8" at the deck end
• Material: Expanded foam with traction coating
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr