Race Ramps 74 Inch Flatbed HD Tow Ramps, 5.2 Degree Approach

Overview

The Race Ramps 74 Inch Flatbed HD Tow Ramps, 5.2 Degree Approach is a ramp from Race Ramps. It is rated at 2,500 lb, with a maximum lifting height of 7".

From Race Ramps

Turn a Rollback Into a 5.2 Degree Approach A tilted rollback bed is somewhere around 10 degrees at the ground. That is fine for a wrecked pickup and a disaster for a lowered Corvette, a 911, or anything with a splitter, which is exactly the call you cannot afford to damage. These 74 inch tow ramps bridge from the ground onto the deck and cut the approach to 5.2 degrees . They add 7 inches of lift over six feet of run, and a 1 inch by 5 inch notch at the top end locates the ramp on the bed so it cannot walk while the car climbs. Choose One Piece for the fastest setup, or Two Piece if you need it to break down into 42.3 inch sections that fit a side box. Both reach the same 74 inches assembled and hold the same angle. Sold as a pair . 2,500 lbs per ramp, rated for vehicles to 10,000 lbs GVW , tires up to 12 inches . Need an even flatter start? Add the XTenders . Benefits of the 74 Inch Tow Ramps Half the angle of a bare deck Dropping to 5.2 degrees is the difference between loading an exotic and explaining a torn splitter to the owner. Six feet of run is what buys that angle, and there is no shortcut to it. Notched to sit on the bed A 1 inch by 5 inch cutout hooks the top end over the lip of the rollback instead of resting against it. The ramp locates itself, stays put under load, and does not need a second person holding it. Two piece stows in a side box Six foot ramps are awkward to carry on a truck that is already full. The Two Piece version splits into 42.3 inch sections that fit a compartment, then reassembles to the full 74 inches at the call. Light enough to set alone …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: BT-TT-7-10
• Capacity: 2,500 lbs per ramp | vehicles to 10,000 lbs GVW
• Lifting height: 7"
• Material: Expanded foam with traction coating and reinforced base
• Finish: Black
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr