Race Ramps 4 Inch Trailer Ramps, 5.5 Degree Approach | RR-TR-4

Overview

The Race Ramps 4 Inch Trailer Ramps, 5.5 Degree Approach | RR-TR-4 is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 4".

From Race Ramps

Four Inches of Lift From a 46 Inch Ramp A tilt deck or a low trailer does not need much help. What it needs is a little extra rise at the lip so the splitter clears, without a ramp so long you cannot store it. The RR-TR-4 is the shortest ramp in the Race Ramps trailer line at 46 inches , and it still holds the approach angle to 5.5 degrees . It lifts 4 inches , which is usually all the difference a tilt trailer or a low deck height needs. The trailer end is notched 5 inches long by 2 inches high so it sits down over the edge of a trailer door or ramp gate instead of resting on top of it. That drops the whole ramp lower and takes another degree or so out of the climb. Sold as a pair . 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches wide. Compare the rest of the trailer ramps . Benefits of the RR-TR-4 Shortest ramp, shallow angle Forty six inches of ramp for four inches of rise works out to 5.5 degrees. Most steel ramps in that length are twice as steep, which is exactly when a front lip catches. Notched to sit on the door The 5 by 2 inch notch drops over a trailer door or gate edge rather than perching on it. Lower starting point, less angle, and the ramp stays put once the tire loads it. Six pounds each Light enough to carry both at once and set them by hand at the trailer. No lifting a steel ramp onto a gate by yourself, and nothing to drop on a rocker panel. Solid foam all the way through There is no frame, no hinge and no welds. Expanded foam carries the load in compression, so the ramp cannot bend, rust or gouge a trailer floor or a driveway. Traction …

About ramps

Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.

What to check before you order

• Approach angle against the front overhang and ride height of your lowest car
• Per-ramp capacity against the axle weight, not the whole vehicle weight
• Ramp length and the height it actually gains you

Key specifications

• Brand: Race Ramps
• Model / part number: RR-TR-4
• Capacity: 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
• Lifting height: 4"
• Material: Expanded foam with traction coating
• Finish: Black
• Shipping weight: 6 lb
• Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
• Origin: Made in the USA

Ideal for

Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.

Ordering & delivery

Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr