Race Ramps 30 Inch Rally Ramps, 5 Inch Lift | RR-30
Race Ramps · Car Ramp · 1,500 lb | SKU# RR-30 Sale
IDRR-30 1 / 7 Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP55562 |
|---|---|
| Manufacturer part # | RR-30 |
| Brand | Race Ramps |
| Category | Car Ramps & Wheel Cribs |
| Product type | Car Ramp |
| Capacity | 1,500 lbs per ramp | 6,000 lbs per pair |
| Lifting height | 5" |
| Overall dimensions | 30" L x 10" W x 6.5" H |
| Shipping weight | 4 lb |
| Finish | Black |
| Origin | Made in the USA |
| Availability | Available to order |
| Delivery | Standard shipping |
| Warranty | 1-year manufacturer warranty | 30-day satisfaction guarantee |
Manufacturer specifications
10 fields as published by Race Ramps.
| Colour | Black |
|---|---|
| Weight | 4 lbs per ramp, 8 lbs per pair |
| Sold As | Pair, two ramps |
| Capacity | 1,500 lbs per ramp | 6,000 lbs per pair |
| Features | Raised end lip and molded carry straps |
| Material | 100% solid high density foam with anti slip traction coating |
| Dimensions | 30" L x 10" W x 6.5" H |
| Lift Height | 5" |
| Approach Angle | 16 degrees |
| Maximum Tire Width | 8" |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Race Ramps 30 Inch Rally Ramps, 5 Inch Lift | RR-30 is a ramp from Race Ramps. It is rated at 1,500 lb, with a maximum lifting height of 5".
From Race Ramps
Five Inches of Room Under a Small Sports Car: the Race Ramps RR-30 Steel ramps are made for trucks. Drive a Miata at one and the air dam hits the ramp before the tire does, and even if you clear it you are left lying on the floor reaching into a five inch gap that a jack would have opened properly. The RR-30 is built the other way round. Thirty inches long to spread the climb, 5" of lift at the top, and a 16 degree approach that suits the short front overhang of a small sports car. Race Ramps sizes them for stock Miatas, Subarus, Evos, BMWs and older MGs . They are 100% solid high density foam with an anti slip coating, so a pair weighs 8 lbs and still carries 6,000 lbs of car. A raised lip at the top tells you through the steering wheel that you have gone far enough, and carry straps are molded in so you are not wrestling them into position. Sold as a pair , for tires up to 8" wide . Need more lift or a shallower climb? Compare the 40" Sport Ramps , or browse all car ramps . Benefits of the RR-30 Sized for small sports cars The 16 degree approach over a 30 inch run works with the short front overhang of a Miata, an Impreza, an Evo or a small BMW. These are cars that a truck ramp simply will not take, and where the nose fouls before the tire ever starts to climb. 6,000 lbs on 8 lbs of foam 1,500 lbs per ramp, 6,000 lbs across the pair, at 4 lbs each. That is far more capacity than any car you would put on a 30 inch ramp needs, from a product light enough to carry in one hand. A lip that tells you to stop The raised end lip gives a clear bump through the wheel when the tire …
About ramps
Solid-core ramps are light enough to carry in one hand and still hold a full-size truck. Low-angle trailer ramps clear the bumper and splitter on a lowered car; wheel cribs give a stable stack at a chosen height.
What to check before you order
- Approach angle against the front overhang and ride height of your lowest car
- Per-ramp capacity against the axle weight, not the whole vehicle weight
- Ramp length and the height it actually gains you
Key specifications
- Brand: Race Ramps
- Model / part number: RR-30
- Capacity: 1,500 lbs per ramp | 6,000 lbs per pair
- Lifting height: 5"
- Material: 100% solid high density foam with anti slip traction coating
- Finish: Black
- Overall dimensions: 30" L x 10" W x 6.5" H
- Shipping weight: 4 lb
- Warranty: 1-year manufacturer warranty | 30-day satisfaction guarantee
- Origin: Made in the USA
Ideal for
Best suited to oil changes, exhaust work, detailing and loading low cars onto trailers.
Ordering & delivery
Warranty Warranty Period: Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty . The warranty begins on the original purchase date and applies only to the original owner . Warranty coverage is not transferable . Warranty Coverage: Coverage is limited to the repair or replacement of manufacturer defects . Race Ramps LLC will determine whether an eligible product should be repaired or replaced. Products sold by Race Ramps but manufactured by another company are covered by that manufacturer's warranty and policies. What the Warr
You may also like
View all ›
Race Ramps Roll Ups, 4 Inch Lift for Floor Jack Access | RR-RU
Race Ramps · 1,500 lb
$205
Race Ramps 72 Inch Two Stage Car Ramps, 6.8 Degree Approach | RR-72-2
Race Ramps · 1,500 lb
$476
Race Ramps 9 Inch Trailer Ramps with Flap Cut Out | RR-TR-9-FLP
Race Ramps · 1,500 lb
$774
Race Ramps 10 Inch Multi Purpose Wheel Cribs, Set of 2
Race Ramps · 1,500 lb
$215
Our price
$147
Race Ramps 30 Inch Rally Ramps, 5 Inch Lift | RR-30
SKU# RR-30 · est. $3/mo*