iDEAL 3,300 lb Powertrain Platform Lift Table | LT-PT3300DC-X

Overview

The iDEAL 3,300 lb Powertrain Platform Lift Table | LT-PT3300DC-X is a scissor lift from iDEAL. It is rated at 3,300 lb, with a maximum lifting height of 72 in. It runs on 110VAC, 1.5 A, 1-phase.

From iDEAL

The 3,300 lb Portable Powertrain Platform Built to Pull Engines, Transmissions and Axles Out from Under a Truck The iDEAL LT-PT3300DC-X is a portable, high-rise, commercial-grade lift table built specifically for the tech pulling powertrain components: engines, transmissions, transfer cases, differentials, drive-axle and transaxle assemblies. Its 3,300 lb capacity handles anything from a small four-cylinder short block to a full 4WD transmission with a transfer case still bolted to it, and the extendable slotted platform adjusts from 31.5 to 36.7 inches long so you can position long assemblies where the bell housing lines up with the crossmember. A 12VDC deep-cycle sealed battery with an integrated 110VAC charger powers the DC electric hydraulic system, so the lift runs whether you have shop air, a wall outlet or nothing but the battery in the base. Dual control: full function from the main control box panel and from the magnetic remote hand controller, so one person can position the platform and stage the load without walking around the lift. The platform rises to 72 inches in 20 seconds and lowers in 22, with three intermediate locking positions at 49, 61 and 68 inches. The platform includes four tie-down ring eyelets and a heavy-duty ratchet strap so the component stays put when you tilt (+/- 6 to 8 degrees) or roll the lift across the shop floor. Portability is built in: an integrated pallet-jack dolly with 6 inch poly wheels and four directional-locking poly swivel casters. Also included: 12VDC auxiliary outlet port for tools, integrated utility / tool tray, sub-platfo…

About scissor lifts

A scissor lift raises the vehicle on a folding frame with no columns in the way, and folds flat when it is not needed. Low- and mid-rise units work at bench height; full-rise models do everything a two-post does.

What to check before you order

• Rise height — low-rise suits wheel and body work, full-rise lets you stand under the car
• Surface mount or flush mount, and whether you can cut the floor for a recess
• Lowered height, which decides what ground clearance the lift can accept
• Portability if the bay has to do other work when the lift is not in use

Key specifications

• Brand: iDEAL
• Model / part number: LT-PT3300DC-X
• Capacity: 3,300 lb
• Lifting height: 72 in
• Power: 110VAC, 1.5 A, 1-phase
• Finish: Durable powder coat
• Shipping weight: 908 lb
• Warranty: iDEAL / Tuxedo standard limited warranty (see manual)

Ideal for

Best suited to wheel, brake, bodywork and detailing jobs in bays short on ceiling or floor space.

Ordering & delivery

This item is in stock. Warranty Structural Warranty — 5 Years: Columns, uprights, legs, arms, carriages, swivel pins, overhead beam, tracks, cross rails, top rail beam. Limited Parts Warranty — 1 Year: Covers lifts and wheel-service equipment under normal use (customer pays freight on warranty parts). Not Covered: Routine-maintenance items and normal-wear parts (cables, slider blocks, chains, rubber pads, pulleys). Replacement of lift / tire-changer cylinders after 30 days (seal kit provided instead). On-site labor or equipment damaged by improper installation or use. Claim Requirements: Inspect freight on arrival;