iDEAL 2,500 lb Air-Hydraulic EV and Hybrid Lift Table | LT-EV2500AH-X

Overview

The iDEAL 2,500 lb Air-Hydraulic EV and Hybrid Lift Table | LT-EV2500AH-X is a scissor lift from iDEAL. It is rated at 2,500 lb, with a maximum lifting height of 72.6 in. It runs on 90 to 125 PSI shop air (6 to 9 BAR).

From iDEAL

The 2,500 lb Air-Hydraulic EV Lift Table for Shops That Already Have Compressed Air The iDEAL LT-EV2500AH-X is a portable, commercial-grade air-hydraulic lift table built for the EV and hybrid tech who already has shop air. Its 2,500 lb capacity handles a modern EV battery pack, motor assembly or hybrid powertrain module, and the same multi-adjustable insulated EV platform used on the bigger LT-EV3300DC-X slides, tilts and locks so you can position that component exactly where it needs to come out or go in. Instead of a 12VDC battery, this version runs on 90 to 125 PSI shop air through an exclusive fully-operational pneumatic hand-operated stainless-steel control panel with integrated air gauge and water separator. That means no charger to plug in, no battery to replace over the life of the lift, and no downtime when the battery is dead. If you have compressed air anywhere in the bay, you have a lift. The 59 x 31.5 inch insulated EV platform includes six adjustable latch clamps , tilt jack screws (+/- 4 to 8 degrees), safety air latches and multi-directional sliding to line up the load. Locks at 49, 61 and 68 inches, max lift 72.6 inches. Portability is built in: four directional-locking poly swivel casters and a removable hand bar. Also included: HD air-hydraulic pump and cylinder, double lift scissors, utility / tool tray, sub-platform storage area, four rubber pads. Backed by iDEAL / Tuxedo. Key Features of the LT-EV2500AH-X That Matter Under an EV: - 2,500 lb Capacity, Air-Hydraulic Operation: Runs on 90 to 125 PSI shop air. No battery to charge or replace. If you have …

About scissor lifts

A scissor lift raises the vehicle on a folding frame with no columns in the way, and folds flat when it is not needed. Low- and mid-rise units work at bench height; full-rise models do everything a two-post does.

What to check before you order

• Rise height — low-rise suits wheel and body work, full-rise lets you stand under the car
• Surface mount or flush mount, and whether you can cut the floor for a recess
• Lowered height, which decides what ground clearance the lift can accept
• Portability if the bay has to do other work when the lift is not in use

Key specifications

• Brand: iDEAL
• Model / part number: LT-EV2500AH-X
• Capacity: 2,500 lb
• Lifting height: 72.6 in
• Power: 90 to 125 PSI shop air (6 to 9 BAR)
• Finish: Durable powder coat
• Shipping weight: 978 lb
• Warranty: iDEAL / Tuxedo standard limited warranty (see manual)

Ideal for

Best suited to wheel, brake, bodywork and detailing jobs in bays short on ceiling or floor space.

Ordering & delivery

This item is in stock. Warranty Structural Warranty — 5 Years: Columns, uprights, legs, arms, carriages, swivel pins, overhead beam, tracks, cross rails, top rail beam. Limited Parts Warranty — 1 Year: Covers lifts and wheel-service equipment under normal use (customer pays freight on warranty parts). Not Covered: Routine-maintenance items and normal-wear parts (cables, slider blocks, chains, rubber pads, pulleys). Replacement of lift / tire-changer cylinders after 30 days (seal kit provided instead). On-site labor or equipment damaged by improper installation or use. Claim Requirements: Inspect freight on arrival;