Daytona LMS6 6,000 lb Mid Rise Scissor Lift

Overview

The Daytona LMS6 6,000 lb Mid Rise Scissor Lift is a scissor lift from Daytona Lifts. It is rated at 6,000 lb. It runs on 120V / 1.5 HP / 15A / 1PH / 60Hz.

From Daytona Lifts

A Lift Where There Is No Room For One: the Daytona LMS6 6,000 lb Mid Rise Scissor Lift Not every shop has the ceiling for a two post or the floor for a four post. Plenty of good work happens in buildings that were never designed around a lift: low garages, rented bays, mobile setups, and shops where the third bay has to stay clear for something else on Tuesdays. The Daytona LMS6 is built for exactly that. It is a 6,000 lb mid rise scissor with an ultrathin 5.5" lowered profile , which means low cars clear it and you can slide it out of the way when the bay is needed for something else. It sits on the floor. Nothing is bolted overhead, nothing blocks the door, and nothing stays behind when you move it. It rises in about 45 seconds on a double cylinder system with a mechanical safety lock , and runs on an ordinary 120V outlet at 1.5 HP and 15 amps . Height extensions and adjustable lifting pads are included , adding 2.5" to 8" so you can set pad height to the vehicle rather than shimming it. This is a tires, brakes, and exhaust machine, not a transmission machine. A mid rise gets the wheels off the ground and the car to a comfortable working height. It does not give you full standing room underneath. Call a Bay Lift Pro lift specialist if you are weighing this against a two post. Compare every scissor lift , see all car lifts , or view the full Daytona lineup . Benefits of the Daytona LMS6 No ceiling requirement at all Nothing goes overhead and nothing bolts to the roof. If a low ceiling is the reason you have not put a lift in, this is the category that solves it. 5.5" lower…

About scissor lifts

A scissor lift raises the vehicle on a folding frame with no columns in the way, and folds flat when it is not needed. Low- and mid-rise units work at bench height; full-rise models do everything a two-post does.

What to check before you order

• Rise height — low-rise suits wheel and body work, full-rise lets you stand under the car
• Surface mount or flush mount, and whether you can cut the floor for a recess
• Lowered height, which decides what ground clearance the lift can accept
• Portability if the bay has to do other work when the lift is not in use

Key specifications

• Brand: Daytona Lifts
• Model / part number: LMS6
• Capacity: 6,000 lbs (2,722 kg)
• Power: 120V / 1.5 HP / 15A / 1PH / 60Hz
• Finish: Powder coated frame
• Warranty: 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts

Ideal for

Best suited to wheel, brake, bodywork and detailing jobs in bays short on ceiling or floor space.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in