Daytona LHS7 6,600 lb High Rise Scissor Lift

Overview

The Daytona LHS7 6,600 lb High Rise Scissor Lift is a scissor lift from Daytona Lifts. It is rated at 6,600 lb, with a maximum lifting height of 74.5". It runs on 240V / 3 HP / 12A / 1PH / 60Hz.

From Daytona Lifts

Full Height, No Posts, No Overhead: the Daytona LHS7 6,600 lb High Rise Scissor Lift A two post lift gives you full working height but puts four column feet in the middle of your bay and a crossbar over the roof. A mid rise scissor keeps the floor clear but never gets the car high enough to stand under. The high rise scissor is the answer to wanting both. The Daytona LHS7 lifts 6,600 lbs to a 74.5" maximum height , with the top mechanical lock at 71.0" . That is genuine standing room for most technicians. When it comes down it collapses to a 4.5" profile , so the bay reverts to open floor and low cars still drive over it. It runs a double hydraulic equalizing system so both platforms rise together, held by pneumatic safety locks that engage at multiple working heights. Full travel takes about one minute on 240V single phase at 3 HP . The platforms are width adjustable from 29.5" to 31.5" between them, and the approach ramps double as platform extensions , taking each runway from 59" to 83" long. This one is anchored, unlike the mid rise. It needs a 6" slab and a level floor, and the platforms bolt down. Call a Bay Lift Pro lift specialist before you order so the slab and the power drop get sorted first. Compare every scissor lift , see all car lifts , or view the full Daytona lineup . Benefits of the Daytona LHS7 74.5" of lift with nothing overhead Standing working height without a crossbar over the roof or columns beside the doors. If your ceiling rules out a two post overhead lift, this is the way to get the same height. Collapses to 4.5" Down flat, the bay is usable floo…

About scissor lifts

A scissor lift raises the vehicle on a folding frame with no columns in the way, and folds flat when it is not needed. Low- and mid-rise units work at bench height; full-rise models do everything a two-post does.

What to check before you order

• Rise height — low-rise suits wheel and body work, full-rise lets you stand under the car
• Surface mount or flush mount, and whether you can cut the floor for a recess
• Lowered height, which decides what ground clearance the lift can accept
• Portability if the bay has to do other work when the lift is not in use

Key specifications

• Brand: Daytona Lifts
• Model / part number: LHS7
• Capacity: 6,600 lbs (2,994 kg)
• Lifting height: 74.5"
• Power: 240V / 3 HP / 12A / 1PH / 60Hz
• Finish: Solid steel construction, powder coated
• Warranty: 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts

Ideal for

Best suited to wheel, brake, bodywork and detailing jobs in bays short on ceiling or floor space.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in