Daytona BR10-2OH-33 10,000 lb Two Post Overhead Lift, ALI Certified

Overview

The Daytona BR10-2OH-33 10,000 lb Two Post Overhead Lift, ALI Certified is a two-post lift from Daytona Lifts. It is rated at 10,000 lb, with a maximum lifting height of 74.8" (1,990 mm) at the pads. It runs on 240V / 3 HP / 12A / 1PH / 60Hz.

From Daytona Lifts

Put an ALI Certified Lift in Your Bay with the Daytona BR10-2OH-33 10,000 lb Two Post Overhead Lift Buying a two post lift on sticker price alone is how shops end up locked out of work they already have the skill to do. Fleet contracts, dealer subcontracts, insurance carriers, and a growing list of municipal inspection programs ask whether the lift carries third-party certification, and an uncertified column is an easy line item for an auditor to flag. The same shortcut shows up in daily use too: chain-drive equalization that needs constant adjustment, arms that only swing one way, and a fixed column spacing that decides which vehicles you can take. The Daytona BR10-2OH-33 answers all of it. It is ALI Certified to the ANSI/ALI ALCTV standard, rated at 10,000 lbs , and built on dual direct drive hydraulic cylinders with a cable equalization system that keeps both carriages level without the slack a chain setup develops. Three-stage front arms run in both asymmetric and symmetric configurations, so a low sports car and a crew cab pickup both get a proper pad placement on the same lift. Truck adapters are included standard , and the column spacing adjusts across three width settings for drive-thru clearance from 88.2" to 100.0" , with 111.4" to 123.2" of open space between the columns. Daytona has supplied shops across the United States and Canada since 1999 , and this is the model in their two post line that carries the certification paperwork. It runs on 240V single phase at 3 HP and 12 amps , which most commercial bays already have on the wall, and it ships with drop-in pad…

About two-post lifts

A two-post lift carries the vehicle on four arms under the frame or pinch welds, leaving all four wheels hanging free. It is the fastest lift to work under and the one most general repair bays are built around.

What to check before you order

• Ceiling height — a clear-floor lift needs room for the overhead beam, a baseplate lift does not
• Concrete thickness and cure: four inches of 3,000 psi concrete is the usual minimum
• Symmetric or asymmetric columns — asymmetric rotates the car back so the doors clear the posts
• Arm reach at full drop, if you intend to lift both a low sports car and a long-wheelbase truck

Key specifications

• Brand: Daytona Lifts
• Model / part number: BR10-2OH-33
• Capacity: 10,000 lbs (4,536 kg)
• Lifting height: 74.8" (1,990 mm) at the pads
• Power: 240V / 3 HP / 12A / 1PH / 60Hz
• Drive type: Dual direct drive hydraulic cylinders
• Warranty: 5-year structural | 2-year electrical, cylinders, and seal kits | 1-year defective parts

Ideal for

Best suited to brake, suspension, exhaust and transmission work in a general service bay.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in