Daytona LTPA10 10,000 lb Two Post Adjustable Overhead Lift

Overview

The Daytona LTPA10 10,000 lb Two Post Adjustable Overhead Lift is a two-post lift from Daytona Lifts. It is rated at 10,000 lb. It runs on 240V / 3 HP / 13A / 1PH / 60Hz.

From Daytona Lifts

The Daytona LTPA10 10,000 lb Two Post Adjustable Overhead Lift, Built for a Normal Sized Bay Plenty of shops buy more lift than their building can take. A 12,000 lb two post wants close to 13 and a half feet of bay width once you account for the columns, and in a standard bay that leaves a technician squeezing past a mirror every time they walk the car. The capacity never gets used, the footprint gets used every single day, and the money went to the wrong spec. The Daytona LTPA10 is sized for the bay most shops actually have. Overall footprint runs 126.8" to 138.6" depending on which of the three width settings you install it at, which is nearly two feet narrower than the 12,000 lb model at its widest. You still get 10,000 lbs , 70.9" of lifting height , and up to 100.4" of drive-thru clearance , which covers every passenger car, SUV, and half-ton to one-ton single-rear-wheel pickup that comes through the door. Underneath it is the same engineering as the bigger Daytona overheads: dual direct drive hydraulic cylinders with cable equalization , automatic safety locks with single-point release , an overhead height limit switch , and polymer slide blocks in the columns. Three-stage front arms reach 21.6" to 44.3" , rear arms 31.5" to 49.2" , and truck adapters, screw-up pads, and rubber door guards are all in the crate. It runs on 240V single phase at 3 HP and 13 amps . Give us your bay dimensions and we will tell you which width setting to spec. If you need ALI certification, the BR10-2OH-33 is the certified 10,000 lb option. For more capacity see the 12,000 lb LTPA12 , and f…

About two-post lifts

A two-post lift carries the vehicle on four arms under the frame or pinch welds, leaving all four wheels hanging free. It is the fastest lift to work under and the one most general repair bays are built around.

What to check before you order

• Ceiling height — a clear-floor lift needs room for the overhead beam, a baseplate lift does not
• Concrete thickness and cure: four inches of 3,000 psi concrete is the usual minimum
• Symmetric or asymmetric columns — asymmetric rotates the car back so the doors clear the posts
• Arm reach at full drop, if you intend to lift both a low sports car and a long-wheelbase truck

Key specifications

• Brand: Daytona Lifts
• Model / part number: LTPA10
• Capacity: 10,000 lbs (4,536 kg)
• Power: 240V / 3 HP / 13A / 1PH / 60Hz
• Drive type: Dual direct drive 6 ft hydraulic cylinders with cable equalization
• Warranty: 5-year structural | 2-year electrical, cylinders, and seal kits | 1-year defective parts

Ideal for

Best suited to brake, suspension, exhaust and transmission work in a general service bay.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in