Triumph 15000 lb Rolling Bridge Jack | RJ-15000
Triumph · Rolling Bridge Jack · 15,000 lb | SKU# RJ-15
IDRJ-15 1 / 2 Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP34570 |
|---|---|
| Manufacturer part # | RJ-15 |
| Brand | Triumph |
| Category | Bridge Jacks & Rolling Jacks |
| Product type | Rolling Bridge Jack |
| Capacity | 15,000 lbs |
| Lifting height | 28.3" |
| Shipping weight | 661 lb |
| Availability | In stock |
| Delivery | Freight carrier |
Manufacturer specifications
10 fields as published by Triumph.
| Capacity | 15,000 lbs |
|---|---|
| Lowered Height | 15.3" |
| Shipping Weight | 661 lbs |
| Shipping Dimensions | 51" x 33" x 17" |
| Maximum Lifting Height | 28.3" |
| Height Adapters Included | 2 sets: 5" and 6.75" |
| Maximum Width Between Pads | 68.7" |
| Minimum Width Between Pads | 42.6" |
| Maximum Width Between Runways | 55" |
| Minimum Width Between Runways | 48.7" |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Triumph 15000 lb Rolling Bridge Jack | RJ-15000 is a rolling bridge jack from Triumph. It is rated at 15,000 lb, with a maximum lifting height of 28.3". It ships by freight, and the delivery options on this listing include the lift-gate and unloading services you may need at the kerb.
From Triumph
Upgrade Your 4 Post Lift with the RJ-15000 – A Heavy-Duty Bridge Jack Built for Trucks and SUVs Buying a bridge jack for your shop isn't always straightforward . Many customers end up with jacks that don’t align with their lift, can’t support heavier vehicles, or just don’t hold up long term. That’s why choosing a reliable , high-capacity solution like the RJ-15000 Rolling Bridge Jack matters—especially when you’re working on trucks , SUVs , or heavier vehicles where safety and efficiency are critical. The RJ-15000 from Triumph solves those common headaches with a beastly 15,000 lb capacity and a broad lift range. Whether you're handling frame-off restorations , suspension work , or general undercarriage access , this bridge jack gets it done smoothly . It needs 48.7" to 55" between runways (see the specifications below), so it does not fit every 4 post lift. Confirm your runway spacing before ordering. Built to roll easily along your lift’s runways, this rolling bridge jack is as user-friendly as it is heavy-duty . It comes with two sets of height adapters (5" and 6.75" ), allowing you to dial in the perfect lift height for different vehicles. Bottom line? It’s the kind of upgrade that immediately increases your shop’s capabilities and helps you work smarter , not harder. Triumph Lifts to Check Against the RJ-15000’s Runway Range Triumph NTR-24 (Bay Lift Pro’s product-page specifications show this lift’s runway spacing overlaps the RJ-15000’s listed 48.7″–55″ range, but only at the widest part of its published 45.3″–49.2″ range. Runway spacing alone does not establish full…
About rolling bridge jacks
A rolling bridge jack sits across the runways of a four-post lift and raises the vehicle off them, so the wheels can come off. Air-over-hydraulic operation means it lifts from shop air with no separate power unit.
What to check before you order
- Runway width and rail profile — a jack must match the lift it rides on
- Minimum pad height against the ground clearance of your lowest vehicle
- Capacity, remembering a jack carries one end of the vehicle, not all of it
- Air supply: most units want 100–150 psi at a reasonable volume
Key specifications
- Brand: Triumph
- Model / part number: RJ-15
- Capacity: 15,000 lbs
- Lifting height: 28.3"
- Shipping weight: 661 lb
Ideal for
Best suited to brake, wheel and suspension work on a four-post lift.
Ordering & delivery
This item is in stock. Freight delivery options start at $575 and are chosen at checkout — lift-gate service, kerbside unloading and residential delivery are priced separately because the right one depends on what equipment you have on site. Warranty Coverage Periods Auto lifts: 1-year parts warranty Auto lift structure (indoor use only): 1-year structural warranty Tire equipment: 1-year warranty Not Covered Labor costs (no labor warranty offered) Normal wear parts, including: Rubber lifting pads Plastic demount heads, rim clamp covers, bead breaker covers Valve stem hoses, wheel weight hammers, wheel cones, wing nuts Warranty Terms Warranty is for parts only. Free ground shipping (USA only) within the first 60 days. After 60 days, all shipping costs must be paid by the customer. International customers are responsible for all shi
You may also like
View all ›
AMGO Manual Rolling Jack - 6,000 lb Capacity | RJ-6H
AMGO · 6,000 lb
$1,445
Tuxedo 8,000 lb Rolling Jack (Low Mount) - Air / Hyd | RAJ-8K-L
Tuxedo · 8,000 lb
$1,975
iDEAL 7,000 lb Rolling Jack (Low Mount) - Air / Hyd | RAJ-7K-L
iDEAL · 7,000 lb
$1,438
Katool 7000lb Rolling Jack | KT-RJ70
KATOOL · 7,000 lb
$1,149
Our price
$3,275
Triumph 15000 lb Rolling Bridge Jack | RJ-15000
SKU# RJ-15 · est. $68/mo*