Katool 4-Post Alignment Lift - 12,000lb Capacity. Rolling Jack Included | KT-4H120X
KATOOL · 4-Post Lift · 12,000 lb | SKU# KT-4H120X Sale
Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP14816 |
|---|---|
| Manufacturer part # | KT-4H120X |
| Brand | KATOOL |
| Category | 4-Post Lifts |
| Product type | 4-Post Lift |
| Capacity | 12,000 lbs |
| Lifting height | 86.9" (2,208 mm) |
| Availability | In stock |
| Delivery | Freight carrier |
| Warranty | 1 Year limited parts & defects | 3 Year structural |
Manufacturer specifications
19 fields as published by KATOOL.
| Motor | 220VAC/60Hz/1PH |
|---|---|
| Lifting Time | 83 seconds up / 40 seconds down |
| Runway Length | 205" (5,207 mm) |
| Safety System | Mechanical locks with primary/secondary backups, single-point manual release, top limit switch |
| Width Overall | 135.2" (3,435 mm) |
| Height of Posts | 94.88" (2,410 mm) |
| Runway Features | Rear slip plates integrated; front turn plates sold separately |
| Synchronization | Quad steel cable & pulley system for level lifting |
| Lifting Capacity | 12,000 lbs |
| Width of Runways | 20" (508 mm) |
| Included Accessory | RJ70 7,000 lb Pneumatic Rolling Jack |
| Max. Lifting Height | 86.9" (2,208 mm) |
| Shipping Dimensions | 3440lbs 209" x 26" x 36" Lift 441lbs 25" x 41" x 15" Jack |
| Concrete Requirement | 100 mm (specifications) or 150 mm (installation section) @ 3,000 PSI |
| Width Inside Columns | 112.81" (2,865 mm) |
| Width Inside Runways | 37" (940 mm) |
| Electrical Requirements | Dedicated circuit, 10-gauge wire, 30-amp breaker (220V only) |
| Max. Underneath Clearance | 80" (2,032 mm) |
| Length Overall (with ramps) | 258" (6,553 mm) |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Katool 4-Post Alignment Lift - 12,000lb Capacity. Rolling Jack Included | KT-4H120X is a four-post lift from KATOOL. It is rated at 12,000 lb, with a maximum lifting height of 86.9" (2,208 mm). It runs on 220VAC/60Hz/1PH. It ships by freight, and the delivery options on this listing include the lift-gate and unloading services you may need at the kerb.
From KATOOL
Need a Service-Ready Alignment Lift? Step Up to the Katool KT-4H120X 12,000 lb 4-Post Lift with RJ70 Rolling Jack Buying a 4-post alignment lift sounds straightforward until the real questions start stacking up. How stable is it under a 10,000 lb truck? Does the lifting height actually give you enough room to work underneath? And what about wheels-off service -- do you need to buy a rolling jack separately, or does the package actually come ready to work? A lot of lifts look similar in photos, but once you're using one daily, the gaps show up fast. The KT-4H120X by Katool is built to close those gaps -- a true 12,000 lb rated capacity with an RJ70 7,000 lb pneumatic rolling jack included in the box, not sold as an add-on. The safety system is where this lift separates from the pack. Mechanical locking devices on each column with primary and secondary lock-style backups , a single-point manual safety release, a top limit switch to prevent over-travel, and a quad cable synchronization system that keeps both platforms level through every inch of travel. Max lifting height is 86.9 inches with 80 inches of underneath clearance , so you have real working room -- not just enough to squeeze under with a creeper. Lift cycle is 83 seconds up and 40 seconds down on 220V single-phase power , which is the only voltage option on this model. What makes the KT-4H120X a genuine alignment platform is the runway setup. Rear slip plates are built into the runways , and front alignment turn plates can be added separately to complete a four-wheel alignment configuration. The included RJ70 rollin…
About four-post lifts
A four-post lift is a drive-on: the vehicle stays on its own wheels on two runways. That makes it the simplest and most stable lift to use, and the only practical way to park one car above another.
What to check before you order
- Runway length against your longest vehicle, and overall width against your bay
- Whether you need a rolling bridge jack to get the wheels off the runways
- A caster kit if the lift has to move; a drip tray if a car will live on top
- Lowered runway height, which sets how steep the approach ramps are
Key specifications
- Brand: KATOOL
- Model / part number: KT-4H120X
- Capacity: 12,000 lbs
- Lifting height: 86.9" (2,208 mm)
- Power: 220VAC/60Hz/1PH
- Warranty: 1 Year limited parts & defects | 3 Year structural
Ideal for
Best suited to alignment, exhaust, detailing, storage and general service.
Ordering & delivery
This item is in stock. Freight delivery options start at $1,200 and are chosen at checkout — lift-gate service, kerbside unloading and residential delivery are priced separately because the right one depends on what equipment you have on site. Warranty Warranty: 12-month limited warranty covering all parts and defects. 36-month structural warranty for vehicle lifts. Warranty Coverage: Covers cylinders, power units, motors, displays, and electronics . Structural elements of the equipment. Replacement parts provided at no charge with free shipping . Warranty Terms & Conditions: Claims must be made within the valid warranty period . Warranty is non-transferable . Customers may need to provide photos or videos for claim verification. Katool warranty support is handled by Katool's US based support team . Katool may require diagnostics, p
Manuals & spec sheets
The manufacturer's own documentation, hosted here so it is still available after you buy.
You may also like
View all ›
AMGO 4-Post Alignment Lift – 14,000 lb Capacity | PRO-14A
AMGO · 14,000 lb
$8,720
AMGO Commercial 4-Post Lift – 30,000 lb Capacity, Extra-Long Runways | PRO-30E
AMGO · 30,000 lb
$19,635
AMGO 4-Post Alignment Lift – 12,000 lb Capacity | PRO-12A
AMGO · 12,000 lb
$6,210
Tuxedo 9,000 lb 4-Post Lift – Includes Poly Casters, Drip Trays, Jack Tray | FP9K-DX-XLT
Tuxedo · 9,000 lb
$4,880
Our price
$4,500
Katool 4-Post Alignment Lift - 12,000lb Capacity. Rolling Jack Included | KT-4H120X
SKU# KT-4H120X · est. $94/mo*