Daytona RAJ12 12,000 lb Rolling Bridge Jack for LFPA24 Alignment Lift

Daytona Lifts · Rolling Bridge Jack · 12,000 lb | SKU# RAJ12 Sale

Daytona RAJ12 12,000 lb Rolling Bridge Jack for LFPA24 Alignment Lift IDRAJ12 1 / 2

Buy with confidence

Car lifts & shop equipment · Freight to all 50 states

Specified in full

Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.

What is included

Core returns & warranty

Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.

How it works

Freight nationwide

Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.

Shipping rates

Financing available

Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.

Apply now
Included with every truck: Pre-shipment inspectionTitle & customs paperworkDelivery quoteImport compliance
Questions? (470) 201-3931

Details

Capacity 12,000 lbs (5,443 kg)
Power Air (pneumatic). No electrical hookup required
Type Rolling Bridge Jack
Warranty 5-year structural | 2-year cylinders and seal kits | 1-year other defective parts
Part # RAJ12

General

Catalogue ID PSP93831
Manufacturer part # RAJ12
Brand Daytona Lifts
Category Bridge Jacks & Rolling Jacks
Product type Rolling Bridge Jack
Capacity 12,000 lbs (5,443 kg)
Availability In stock
Delivery Standard shipping
Warranty 5-year structural | 2-year cylinders and seal kits | 1-year other defective parts

Manufacturer specifications

16 fields as published by Daytona Lifts.

Fits Daytona LFPA24 24,000 lb four post alignment lift
Sold Individually, one jack per unit
Type Air operated rolling bridge jack, scissor mechanism
Safety Mechanical safety lock engaging at 20.0" working height
Blueprint View the engineer stamped dimensional drawing
Power Source Air (pneumatic). No electrical hookup required
Overall Width 23.9" (607 mm)
Platform Length 37.4" (950 mm)
Roller Diameter 4.7" (120 mm)
Collapsed Height 8.3"
Lifting Capacity 12,000 lbs (5,443 kg)
Shipping Dimensions 42" x 25" x 10" | 450 lbs
Arm Span, Pad to Pad 35.4" to 63.0" (900 to 1,600 mm)
Base Length Adjustment 40.6" to 45.3" (1,032 to 1,150 mm)
Working Height on Lock 20.0"
Saddle Travel (blueprint) 9.1" to 21.7" (230 to 550 mm), 11.8" to 24.4" with pad adapters

Finance this truck

Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.

Estimated from $35/mo
Call (470) 201-3931

About this product

Overview

The Daytona RAJ12 12,000 lb Rolling Bridge Jack for LFPA24 Alignment Lift is a rolling bridge jack from Daytona Lifts. It is rated at 12,000 lb. It runs on Air (pneumatic). No electrical hookup required.

From Daytona Lifts

Wheels Free on a 24,000 lb Rack: the Daytona RAJ12 12,000 lb Rolling Bridge Jack A four post lift holds a vehicle by its own wheels. That is exactly what you want for an alignment, and exactly what you do not want the moment the job turns into a brake rotor, a wheel bearing, or a tire. Without a rolling jack the vehicle comes off the rack and the bay stops earning. The Daytona RAJ12 is the jack Daytona designed specifically for the LFPA24 . It rolls along the runways, spans the gap, and lifts 12,000 lbs clear of the deck so an axle can come off the ground while the rack stays where it is. Its lifting arms adjust from 35.4" to 63.0" , the same span Daytona's LFPA24 drawing shows for the rolling jack drawn on that lift. It is air powered , so there is no electrical hookup to run, and a mechanical safety lock engages at the 20.0" working height . Collapsed it sits at 8.3" , low enough to roll under a vehicle already on the rack rather than making you plan around it. Most alignment shops end up buying two. One jack does one axle at a time. If you regularly need both ends free, order a pair, and order them with the rack so they arrive together. Call a Bay Lift Pro lift specialist to spec it. Browse every rolling bridge jack , see all alignment lifts , or view the full Daytona lineup . Benefits of the Daytona RAJ12 Turns an alignment rack into a service bay Brakes, bearings, tires, and suspension all become possible without taking the vehicle off the lift. On a rack that costs what an LFPA24 costs, that is the difference between one job and three. 12,000 lbs, which is the point T…

About rolling bridge jacks

A rolling bridge jack sits across the runways of a four-post lift and raises the vehicle off them, so the wheels can come off. Air-over-hydraulic operation means it lifts from shop air with no separate power unit.

What to check before you order

  • Runway width and rail profile — a jack must match the lift it rides on
  • Minimum pad height against the ground clearance of your lowest vehicle
  • Capacity, remembering a jack carries one end of the vehicle, not all of it
  • Air supply: most units want 100–150 psi at a reasonable volume

Key specifications

  • Brand: Daytona Lifts
  • Model / part number: RAJ12
  • Capacity: 12,000 lbs (5,443 kg)
  • Power: Air (pneumatic). No electrical hookup required
  • Warranty: 5-year structural | 2-year cylinders and seal kits | 1-year other defective parts

Ideal for

Best suited to brake, wheel and suspension work on a four-post lift.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in

You may also like

View all ›
Call