Daytona LTPF9 9,000 lb Two Post Floorplate Lift
Daytona Lifts · 2-Post Lift · 9,000 lb | SKU# LTPF9 Sale
Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP96299 |
|---|---|
| Manufacturer part # | LTPF9 |
| Brand | Daytona Lifts |
| Category | 2-Post Lifts |
| Product type | 2-Post Lift |
| Capacity | 9,000 lbs (4,082 kg) |
| Availability | In stock |
| Delivery | Standard shipping |
| Warranty | 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts |
Manufacturer specifications
20 fields as published by Daytona Lifts.
| Arm Reach | Short arms 22.8" to 41.3" (580 to 1,050 mm) Long arms 32.7" to 51.9" (830 to 1,300 mm) |
|---|---|
| Blueprint | View the engineer stamped dimensional drawing |
| Lift Type | 2-Post Floorplate Lift, three-stage asymmetric arms |
| Base Plate | 14.8" × 16.9" (375 × 430 mm) |
| Drive Type | Chain over hydraulic cylinders |
| Column Width | 11.2" (284 mm) |
| Lifting Range | 4.5" to 74.8" (115 to 1,900 mm) |
| Overall Width | 131.2" (3,332 mm) at the floor 124.6" (3,165 mm) at the columns |
| Safety System | Automatic safety locks with single-point release, height limit switch, rubber door guards |
| Overall Height | 110.0" (2,795 mm) |
| Lifting Capacity | 9,000 lbs (4,082 kg) |
| Power Requirement | 240V / 3 HP / 13A / 1PH / 60Hz |
| Floor Plate Height | 0.6" (15 mm) |
| Overhead Extension | 7.0" (178 mm) |
| Shipping Dimensions | Lift: 114" × 18" × 30" | 1,300 lbs Pump: 31" × 12" × 11" | 60 lbs |
| Concrete Requirement | Manual floor section: 4" at 3,500 PSI, steel-reinforced; installation section: C30 foundations deeper than 800 mm; product FAQ: 4-6 inches at 3,000-4,000 PSI |
| Drive-Thru Clearance | 98.9" (2,512 mm) |
| Included Accessories | Truck adapters, screw-up pads, and rubber door guards |
| Motor Mounting Height | 62.6" (1,589 mm) |
| Width Between Columns | 110.5" (2,806 mm) |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Daytona LTPF9 9,000 lb Two Post Floorplate Lift is a two-post lift from Daytona Lifts. It is rated at 9,000 lb. It runs on 240V / 3 HP / 13A / 1PH / 60Hz.
From Daytona Lifts
A Real Two Post Lift for a Standard Garage: the Daytona LTPF9 9,000 lb Floorplate Lift The usual advice for a garage with a nine or ten foot ceiling is to forget a two post lift and buy a scissor. That advice costs you the thing you actually wanted, which is standing up under the car with the wheels hanging free and full access to the suspension, exhaust, and brakes. A mid-rise scissor sits under the vehicle and blocks half of it. The Daytona LTPF9 stands 110.0" overall. That is 9'-2" , which fits under a standard nine and a half foot residential garage ceiling with room to spare. It is a genuine two post lift with 9,000 lbs of capacity , 74.8" of lifting height , and 98.9" of drive-thru clearance . The equalization runs through a 0.6" floor plate rather than an overhead beam, which is exactly how it gets that low. It uses chain over hydraulic cylinders with automatic safety locks and single-point lock release , high-polymer polyethylene slide blocks in the columns, and a height limit switch . Three-stage front arms reach 22.8" to 41.3" , rear arms 32.7" to 51.9" , and truck adapters, screw-up pads, and rubber door guards all ship in the crate. It runs on 240V single phase at 3 HP and 13 amps , and the whole thing weighs 1,360 lbs across two pallets. Measure your ceiling and your slab, then call us. Those two numbers decide everything. If you need more capacity at a similar height, the 12,000 lb LTPF12 floorplate stands 114.0". If you have 12 feet of ceiling, the overhead LTPA10 and ALI certified BR10-2OH-33 keep the floor clear. Or compare every 2 post car lift and the ful…
About two-post lifts
A two-post lift carries the vehicle on four arms under the frame or pinch welds, leaving all four wheels hanging free. It is the fastest lift to work under and the one most general repair bays are built around.
What to check before you order
- Ceiling height — a clear-floor lift needs room for the overhead beam, a baseplate lift does not
- Concrete thickness and cure: four inches of 3,000 psi concrete is the usual minimum
- Symmetric or asymmetric columns — asymmetric rotates the car back so the doors clear the posts
- Arm reach at full drop, if you intend to lift both a low sports car and a long-wheelbase truck
Key specifications
- Brand: Daytona Lifts
- Model / part number: LTPF9
- Capacity: 9,000 lbs (4,082 kg)
- Power: 240V / 3 HP / 13A / 1PH / 60Hz
- Drive type: Chain over hydraulic cylinders
- Warranty: 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts
Ideal for
Best suited to brake, suspension, exhaust and transmission work in a general service bay.
Ordering & delivery
This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in
Features
Manuals & spec sheets
The manufacturer's own documentation, hosted here so it is still available after you buy.
You may also like
View all ›
Atlas Commercial Grade Baseplate 2-Post Lift - 10,000 lb Capacity | BP10000X
Atlas · 10,000 lb
$3,899
Tuxedo 12,000lb Two Post Lift | TP12KFX
Tuxedo · 12,000 lb
$6,899
iDEAL 12,000lb ALI Certified Two Post Lift | TP12KSC-DX
iDEAL · 12,000 lb
$6,900
Atlas Commercial Grade Extra Tall 2-Post Lift - 10,000 lb Capacity | OHX10000X
Atlas · 10,000 lb
$4,449
Our price
$2,679
Daytona LTPF9 9,000 lb Two Post Floorplate Lift
SKU# LTPF9 · est. $56/mo*