Daytona LTPF12 12,000 lb Two Post Floorplate Lift
Daytona Lifts · 2-Post Lift · 12,000 lb | SKU# LTPF12 Sale
Buy with confidence
Car lifts & shop equipment · Freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid, and the installation manual as a PDF wherever one is published.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Lifts and machines ship crated by freight carrier to all 50 states. Lift-gate and unloading options are priced on the listing, so there is no surprise at the kerb.
Shipping ratesFinancing available
Spread the cost over monthly payments through our finance provider. Applying is a soft inquiry and has no impact on your credit score.
Apply nowDetails
General
| Catalogue ID | PSP01236 |
|---|---|
| Manufacturer part # | LTPF12 |
| Brand | Daytona Lifts |
| Category | 2-Post Lifts |
| Product type | 2-Post Lift |
| Capacity | 12,000 lbs (5,443 kg) |
| Availability | In stock |
| Delivery | Standard shipping |
| Warranty | 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts |
Manufacturer specifications
21 fields as published by Daytona Lifts.
| Arm Reach | 32.3" to 63.8" (820 to 1,620 mm) |
|---|---|
| Blueprint | View the engineer stamped dimensional drawing |
| Lift Type | 2-Post Floorplate Lift, three-stage front arms, two-stage rear arms |
| Drive Type | Dual chain drive hydraulic cylinders |
| Column Height | 114.0" (2,895 mm), the same as the overall height. A floorplate lift has nothing above the columns. |
| Lifting Range | 4.33" to 74.80" (110 to 1,900 mm) |
| Overall Width | 155.5" (3,950 mm) across the floor plate 146.1" (3,711 mm) at the columns, outside to outside |
| Safety System | Automatic safety locks with single-point lock release |
| Overall Height | 114.0" (2,895 mm) |
| Front Clearance | 9.4" (240 mm) |
| Lifting Capacity | 12,000 lbs (5,443 kg) |
| Column Base Depth | 20.9" (530 mm) |
| Floor Plate Width | 19.5" (495 mm) |
| Power Requirement | 240V / 3 HP / 13A / 1PH / 60Hz |
| Minimum Pad Height | 2.1" (54 mm) at rest |
| Shipping Dimensions | Lift: 116" × 22" × 39" | 2,200 lbs Pump: 31" × 12" × 11" | 60 lbs |
| Base Plate Thickness | 0.8" (20 mm) |
| Concrete Requirement | Manual floor section: 4" at 3,500 PSI, steel-reinforced; installation section: C30 foundations deeper than 800 mm |
| Drive-Thru Clearance | 112.0" (2,844 mm) between the carriages, which is the narrowest point |
| Included Accessories | Truck adapters, screw-up pads, and rubber door guards |
| Width Between Columns (inside to inside) | 127.2" (3,230 mm) |
Finance this truck
Get approved in minutes through our financing partner. Low monthly payments, no impact on your credit score to apply.
About this product
Overview
The Daytona LTPF12 12,000 lb Two Post Floorplate Lift is a two-post lift from Daytona Lifts. It is rated at 12,000 lb. It runs on 240V / 3 HP / 13A / 1PH / 60Hz.
From Daytona Lifts
Put 12,000 lbs in a Low Ceiling Bay with the Daytona LTPF12 Two Post Floorplate Lift Most two post lifts want a 12 foot ceiling before you can even think about them, and that single number rules out an enormous number of real shops. Older buildings, converted units, strip-mall bays with a low deck above, home garages with a bonus room on top. The capacity you need exists, the money exists, and the ceiling says no. Shops in that position usually end up on an undersized mid-rise scissor lift and give up on real under-vehicle access. The Daytona LTPF12 is the way around it. It is a floorplate lift , which means the equalization runs through a plate on the floor instead of an overhead bar, and the whole lift stands just 114.0" . That is a 10 foot ceiling , not twelve and a half. You get the full 12,000 lb capacity , 74.8" of lifting height , and 112.0" of drive-thru clearance in a bay an overhead lift cannot legally occupy. It runs dual chain drive hydraulic cylinders with automatic safety locks and single-point lock release , three-stage front arms reaching 32.3" to 63.8", and a heavy-duty baseplate design that carries the load into the floor rather than a top beam. Truck adapters, screw-up pads, and rubber door guards are all in the crate, and it runs on 240V single phase at 3 HP and 13 amps . Measure your ceiling before you shop anything else. Call a Bay Lift Pro lift specialist with that number and we will tell you what fits. If you have the height, the ALI certified BR10-2OH-33 and the 15,000 lb LTPO15 are the overhead alternatives. Or compare every 2 post car lift and the…
About two-post lifts
A two-post lift carries the vehicle on four arms under the frame or pinch welds, leaving all four wheels hanging free. It is the fastest lift to work under and the one most general repair bays are built around.
What to check before you order
- Ceiling height — a clear-floor lift needs room for the overhead beam, a baseplate lift does not
- Concrete thickness and cure: four inches of 3,000 psi concrete is the usual minimum
- Symmetric or asymmetric columns — asymmetric rotates the car back so the doors clear the posts
- Arm reach at full drop, if you intend to lift both a low sports car and a long-wheelbase truck
Key specifications
- Brand: Daytona Lifts
- Model / part number: LTPF12
- Capacity: 12,000 lbs (5,443 kg)
- Power: 240V / 3 HP / 13A / 1PH / 60Hz
- Drive type: Dual chain drive hydraulic cylinders
- Warranty: 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts
Ideal for
Best suited to brake, suspension, exhaust and transmission work in a general service bay.
Ordering & delivery
This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in
Features
Manuals & spec sheets
The manufacturer's own documentation, hosted here so it is still available after you buy.
You may also like
View all ›
Katool 2 Post Vehicle Lift - 14,000lb Capacity | KT-M140XD
KATOOL · 14,000 lb
$3,699
AMGO Heavy-Duty 15,000 lb 2-Post Lift | OH-15
AMGO · 15,000 lb
$6,100
Triumph 16,000 lb Two Post Vehicle Auto Lift | NT-16
Triumph · 16,000 lb
$5,575
AMGO Commercial 18,000 lb 2-Post Lift | OH-18
AMGO · 18,000 lb
$7,695
Our price
$4,047
Daytona LTPF12 12,000 lb Two Post Floorplate Lift
SKU# LTPF12 · est. $84/mo*