Daytona BR10-2OH-33-EXT Two Foot Height Extension Kit for BR10-2OH-33 Lift

Overview

The Daytona BR10-2OH-33-EXT Two Foot Height Extension Kit for BR10-2OH-33 Lift is a specialty lift from Daytona Lifts. It is rated at 10,000 lb.

From Daytona Lifts

Add Two Feet of Overhead Clearance to Your Daytona BR10-2OH-33 A standard Daytona BR10-2OH-33 stands 144.2" to the top of the overhead bar. That clears almost everything a general repair bay sees, right up until a high-roof cargo van, a lifted diesel with a light bar, or a service body rolls in and the shutoff bar is the thing in the way. At that point the vehicle either does not go up or it goes up and you spend the job worried about the roof. The BR10-2OH-33-EXT is the factory answer. It adds two feet of column height , bringing the lift to 167.8" overall , and it ships with the post extensions and the longer equalization cables the taller configuration needs. This is not a spacer kit. The cables are matched to the new travel so the equalization system works exactly as it did at standard height. Fit it at installation and the extra height costs you nothing in labor, since the columns are already coming apart. Retrofitting later is entirely doable, it just means dropping the lift and re-running the cables. If your ceiling is 14'-6" or better and tall vehicles are anywhere in your mix, buying it with the lift is the cheaper decision. Not sure whether your bay needs it? Call a Bay Lift Pro lift specialist with your ceiling height and the tallest vehicle you service and we will tell you straight. Or go back to the BR10-2OH-33 lift , see the full Daytona lineup , or compare every 2 post car lift we carry. Benefits of the BR10-2OH-33-EXT Kit Two more feet of vehicle clearance High-roof Transits, Sprinters, box vans, and lifted trucks stop being jobs you turn away. Twenty-four i…

About specialty lifts

Lifting equipment for the jobs a fixed two- or four-post cannot take: mobile column sets that travel to the vehicle, single-post lifts for one-bay shops, and motorcycle, ATV and UTV lifts that bring small machines to working height.

What to check before you order

• Capacity per column and how many columns the set needs for your heaviest vehicle
• Power and charging arrangements for battery-powered mobile columns
• Floor flatness and surface, which matters far more for mobile equipment
• Certification, if your insurer or jurisdiction requires an ALI-certified lift

Key specifications

• Brand: Daytona Lifts
• Model / part number: BR10-2OH-33-EXT
• Capacity: None. Lift remains rated at 10,000 lbs
• Warranty: Covered under the Daytona parts warranty for the BR10-2OH-33

Ideal for

Best suited to truck, bus and fleet work, single-bay shops and powersports service.

Ordering & delivery

This item is in stock. Warranty 5-2-1 Limited Warranty: Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice. 5 Years: Structural components. 2 Years: Power units, motors, cylinders, and seal kits. 1 Year: Other eligible defective parts, subject to exclusions. Warranty coverage applies to the original owner only and is not transferable . Warranty Coverage: The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship . Approved defective parts will be replaced in